Use the Raspberry Pi V2 camera to stream video and store data in the development board’s 256-MBit, 1.6 Gbps LPDDR4 or 2.0 Gbps LPDDR4x SDRAM. Two IMX477 camera connector daughter cards let you process video data from 12.3 megapixel IMX477 camera modules (not included). The development board also has two Macronix high-performance 256 Mb SPI NOR flash chips so you can store additional user data such as RISC-V software. The kit also includes Ethernet and HDMI connector daughter cards so you can process data in the FPGA and send it to a display or another system. Learn more about Titanium FPGAs

With the development kit, you get a license for the Efinity® software with 1 year of upgrades. The Efinity software provides a complete tool flow from RTL design to bitstream generation, including synthesis, place-and-route, debugging, and timing analysis.

Features

• Efinix Ti180M484I3 FPGA in a 484-ball FineLine BGA package
• LPDDR4 or LPDDR4x 256 Mbit x16 bits memory:
  • Up to 2.0 Gbps double-data rate (LPDDR4x)
  • Up to 1.6 Gbps double-data rate (LPDDR4)
• Two 256 Mbit SPI NOR flash memories
• Four MIPI, LVDS, and GPIO high-speed QSE connectors to attach the daughter cards
  included in the kit or your own custom daughter cards
• Micro-SD card slot
• FPGA mezzanine card (FMC) with low pin-count connector (LPC)
• USB Type-C connector to configure the development board
• 33.33, 50, and 74.25 MHz oscillators for Ti180 PLL input
• User LEDs and switches:
  • 6 LEDs
  • 2 pushbutton switches
• Power:
  • 12.0 V power supply connector
  • On-board regulator sources: 0.62 V, 0.85 V, 0.95 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 5.0 V
  • Power good and Ti180 configuration done LEDs